RICCA

  • Calcium ICPMS, 1000 ppm / HNO3 100 mL Poly natural
    $163.38
  • Bismuth ICPMS, 1000 ppm / HNO3 100 mL Poly natural
    $163.38
  • Beryllium ICPMS,1000ppm /HNO3 100 mL Poly natural
    $163.38
  • Barium ICPMS, 1000 ppm in HNO3 100 mL Poly natural
    $163.38
  • Boron ICPMS, 1000 ppm in H2O 100 mL Poly natural
    $217.84
  • Gold ICPMS, 1000 ppm in HCl 100 mL Glass amber
    $453.82
  • Arsenic ICPMS, 1000 ppm / HNO3 100 mL Poly natural
    $163.38
  • Aluminum ICPMS, 1000 ppm /HNO3 100 mL Poly natural
    $163.38
  • Silver ICPMS, 1000 ppm in HNO3 100 mL Amber poly
Ricca Silver ICP-MS standard is used for water analysis. Specifically, it is used to calibrate an Inductively Coupled Plasma Mass Spectrometer (ICP-MS) to detect and quantify silver in water samples.How the standard is used for water analysis:Calibration: The Ricca Silver ICP-MS standard is a certified reference material containing a known, precise concentration of silver. During water analysis, it is used to create a calibration curve. This curve allows the ICP-MS instrument to accurately determine the unknown concentration of silver in a water sample by comparing the signal from the sample to the known signals from the standard.Traceability: Ricca standards, including those for ICP-MS, are traceable to the National Institute of Standards and Technology (NIST), which ensures the accuracy and reliability of the analytical results.Quality Control: These standards can also be used for quality control checks to verify that the ICP-MS is operating correctly and providing accurate results throughout the analysis. Typical procedure for silver analysis in water:A water sample is prepared, which may involve acid digestion to ensure all silver is in a dissolved state and can be properly measured.The ICP-MS instrument is calibrated using the Ricca Silver ICP-MS standard and other multi-element standards as needed.The prepared water sample is introduced into the ICP-MS, where it is heated in a high-temperature plasma.The ICP-MS measures the presence and quantity of silver ions in the sample based on the calibration curve.The analysis follows established methodologies like those provided by the U.S. Environmental Protection Agency (EPA), which outlines procedures for measuring elements in water and waste by ICP-MS.
    $199.68
  • MISA Cal 6, Transition Metals 100 mL Amber poly
    $428.60
  • MISA Cal 5, Fluoride Soluble 100 mL Poly natural
    $428.60
  • MISA Cal 1, Rare Earth 100 mL Poly natural
    $438.40
  • Mixed Cal Std 3, Rev 4.4, ICP 100 mL Poly natural
    $161.75
  • Mixed Cal Std 2, Rev 4.4, ICP 100 mL Poly natural
    $215.66
  • Lab Performance Ck, Mtd 200.11 100 mL Poly natural
    $520.64
  • Instrument Cal Std 4, CLP 100 mL Poly natural
    $190.95
  • Instrument Cal Std 2, CLP 100 mL Amber poly
    $250.33
  • Instrument Cal Std 1, CLP 100 mL Poly natural
    $355.07
  • Instrument Ck Std #3, for ICP 100 mL Poly natural
    $313.69
  • Interference Check Std #5 100 mL Poly natural
    $333.64
  • Interference Ck Std, 15 elemen 100 mL Poly natural
    $274.44
  • Init Cal Ver Std 7, CLP 500 mL Amber poly
    $1,181.76
  • Init Cal Ver Std 7 (Rev), CLP 100 mL Amber poly
    $627.20
  • ICPMS Blend, 8 elements @20ppm 500 mL Amber poly
    $115.63