Single Element

  • Iron ICP-MS Standard, 1000 ppm Fe in 3% HNO3, 100 mL Natural Poly
    $163.38
    (100 mL)
  • Iron ICP-MS Standard, 10000 ppm Fe in 5% HNO3, 100 mL Natural Poly
    $263.22
    (100 mL)
  • Iron ICP-MS Standard, 5 ppm Fe, 500 mL Natural Poly
    $100.95
    (500 mL)
  • Lead ICP-MS Standard, 1 ppm Pb, 500 mL Natural Poly
    $202.89
    (500 mL)
  • Lead ICP-MS Standard, 10 ppm Pb, 500 mL Natural Poly
    $107.49
    (500 mL)
  • Lead ICP-MS Standard, 1000 ppm Pb in 3% HNO3, 100 mL Natural Poly
    $163.38
    (100 mL)
  • Lead ICP-MS Standard, 5 ppm Pb, 500 mL Natural Poly
    $107.37
    (500 mL)
  • Lithium ICP-MS Standard, 1000 ppm Li in 3% HNO3, 100 mL Natural Poly
    $163.38
    (100 mL)
  • Magnesium ICP-MS Standard, 1000 ppm Mg in 3% HNO3, 100 mL Natural Poly
    $163.38
    (100 mL)
  • Magnesium ICP-MS Standard, 10000 ppm Mg in 5% HNO3, 100 mL Natural Poly
    $263.22
    (100 mL)
  • Manganese ICP-MS Standard, 1000 ppm Mn in 3% HNO3, 100 mL Natural Poly
    $163.38
    (100 mL)
  • Mercury ICP-MS Standard, 1000 ppm Hg in 3% HNO3, 100 mL Natural Poly
    $163.38
    (100 mL)
  • Mercury ICP-MS Standard, 10000 ppm Hg in 10% HNO3, 100 mL Natural Poly
    $263.22
    (100 mL)
  • Molybdenum ICP-MS Standard, 1000 ppm Mo in 3% NH4OH, 100 mL Natural Poly
    $163.38
    (100 mL)
  • Nickel ICP-MS Standard, 1000 ppm Ni in 3% HNO3, 100 mL Natural Poly
    $163.38
    (100 mL)
  • Potassium ICP-MS Standard, 1000 ppm K in 3% HNO3, 100 mL Natural Poly
    $145.23
    (100 mL)
  • Potassium ICP-MS Standard, 10000 ppm K in 5% HNO3, 100 mL Natural Poly
    $272.29
    (100 mL)
  • Rhodium ICP-MS Standard, 1000 ppm Rh in 3% HCl, 100 mL Natural Poly
    $889.52
    (100 mL)
  • Scandium ICP-MS Standard, 1000 ppm Sc in 3% HNO3, 100 mL Natural Poly
    $317.68
    (100 mL)
  • Selenium ICP-MS Standard, 1000 ppm Se in 3% HNO3, 100 mL Natural Poly
    $163.38
    (100 mL)
  • Silicon ICP-MS Standard, 1000 ppm Si in H2O/trace HF, 100 mL Natural Poly
    $217.84
    (100 mL)
  • Silver ICPMS, 1000 ppm in HNO3 100 mL Amber poly
Ricca Silver ICP-MS standard is used for water analysis. Specifically, it is used to calibrate an Inductively Coupled Plasma Mass Spectrometer (ICP-MS) to detect and quantify silver in water samples.How the standard is used for water analysis:Calibration: The Ricca Silver ICP-MS standard is a certified reference material containing a known, precise concentration of silver. During water analysis, it is used to create a calibration curve. This curve allows the ICP-MS instrument to accurately determine the unknown concentration of silver in a water sample by comparing the signal from the sample to the known signals from the standard.Traceability: Ricca standards, including those for ICP-MS, are traceable to the National Institute of Standards and Technology (NIST), which ensures the accuracy and reliability of the analytical results.Quality Control: These standards can also be used for quality control checks to verify that the ICP-MS is operating correctly and providing accurate results throughout the analysis. Typical procedure for silver analysis in water:A water sample is prepared, which may involve acid digestion to ensure all silver is in a dissolved state and can be properly measured.The ICP-MS instrument is calibrated using the Ricca Silver ICP-MS standard and other multi-element standards as needed.The prepared water sample is introduced into the ICP-MS, where it is heated in a high-temperature plasma.The ICP-MS measures the presence and quantity of silver ions in the sample based on the calibration curve.The analysis follows established methodologies like those provided by the U.S. Environmental Protection Agency (EPA), which outlines procedures for measuring elements in water and waste by ICP-MS.
    $199.68
    (100 mL)
  • Sodium ICP-MS Standard, 1000 ppm Na in 3% HNO3, 100 mL Natural Poly
    $163.38
    (100 mL)
  • Sodium ICP-MS Standard, 10000 ppm Na in 3% HNO3, 100 mL Natural Poly
    $272.29
    (100 mL)